Results 1 to 4 of 4
-
03-06-2007, 10:59 PM #1
Mounting considerations for lotus 138
I remember reading somewhere that a 3.6 x 7mm drill bit is the weapon of choice when mounting 138's. I searched but the details seem to be buried in an off-topic thread.
Any help + any other considerations.
Also any theory's on preparing the bases of dps skis? Mine seem a tad dry. I don't want to get super techy anal about it. Just done right.
Ta,Last edited by jerr; 03-07-2007 at 01:56 AM.
Nine out of ten Jeremy's prefer a warm jacket to a warm day
-
03-07-2007, 12:08 AM #2
Why not email Stephan? He seems to be really helpful with this sort of stuff.
Of course, report back here too."I knew in an instant that the three dollars I had spent on wine would not go to waste."
-
03-07-2007, 09:51 AM #3
3.5 x 8mm is my bit of choice. are you on this years or last years? if last years, hold the screws up befre drilling to kae sure you don't need to grind the screws a small bit.
also, throw a coat or two of graphite wax then wax with temp wax as needed.
-
03-08-2007, 05:54 AM #4
Similar Threads
-
Mounting Pow Plus (and other basic mounting questions)
By otis in forum Tech TalkReplies: 5Last Post: 02-08-2008, 05:48 PM -
Blower mounting point? Sidewall confusion.
By cooltsi in forum Tech TalkReplies: 16Last Post: 03-05-2007, 03:44 PM -
Mounting FKs on Sugars - the sequel
By kid4lyf in forum Tech TalkReplies: 15Last Post: 12-11-2006, 08:11 AM -
Mounting Carbon Surf 188s AT?
By yesIsaidyes in forum Tech TalkReplies: 2Last Post: 03-28-2006, 05:12 PM -
Mounting Cougars?
By iskibc in forum Tech TalkReplies: 3Last Post: 12-19-2003, 10:36 PM
Bookmarks