ccdba cs vs monarch plus rc3 on a tracerT27.5

[Shepherd Wong]

I'm an idiot and tuning mine was a piece of cake, you just need to order the fill adapter and a few shims.

[kidwoo]

Good to know. I've already got a decent collection of shims I bought to build a real rebound damper for a buddy's old Manitou fork a few years ago.

I thought I remembered seeing a rebuild and tune video that sram put out as well.

[jm2e]

I think toast did a review of the monarch plus on Blister and he links to the SRAM video in there.

[forty]

http://forums.mtbr.com/shocks-suspen...ck-826666.html

http://forums.mtbr.com/shocks-suspen...ck-792842.html

I think those two are the ones that cover everything in the guts of Monarchs.

Twitchy stabby? It's that how you are all the time?

thanks, good links, i had read one but not the other, once this rain stops a buddy and i are going to get his new to him monarch plus dialed in and those will be very helpful

like woo, mtbr searching brings out the hatorade in me

[kidwoo]

I think toast did a review of the monarch plus on Blister and he links to the SRAM video in there.

Nah that was some other douchebag that wrote that.

[toast2266]

Nah that was some other douchebag that wrote that.

heh.

I do have a season on an RC3 and agree that it's the tits. As for links to shim stack recommendations, I got nothing.

[Shepherd Wong]

I guess I should also recommend building/buying something to clamp the damper shaft to undo the nut and get at the shims.

These are the instructions that I used. http://cdn.sram.com/cdn/farfuture/sG...ch_plus_sm.pdf